Sitemap
What We Offer
Manoj Engineering

Semi Automatic Machine

Features

The Semi-Auto is an economic HT-HP dyeing system of vertical design for all yarn. The dyeing capacity ranges from 50-3,000 kg with the same liquor ratio. The machine is operated with an air cushion, but can also be equipped with full flooding. The Semi-Auto is suitable for cross-wound bobbins, warp beams, yarn hanks, loose stock and combed top, yarn springs loaded,cotton,polyester,woolen.

Standard Design And Manufacturing Features

  • • Nominal loading capacities from 50 to 3000 kg.
  • • Rapid lid locking system.
  • • Water protected motors (IEC Standards IP54).
  • • Magneto-thermal motor protections.
  • • Pressure rating of 4.5 kg/cm2, up to 160°C temperature, temperature lock at 140C.
  • • Construction in AISI 316Ti/L stainless steel, for all the part in contact with dyeing liquor.
  • • four-level safety interlock systems.
  • • Heat exchangers rated for 14.0 kg/cm2 operating pressure.
  • • Heating gradient 6°C./minute (range 20-80°C steam pressure 6.0 kg/cm2) Cooling gradient 3°C./minute (range 130-108°C water temp. 15°C, pressure 1.5kg/cm2).
  • • Pneumatic lid lifting and lowering.

Automated Electrical Saffty

•“y” Type Valve- This valve is attached on the main door with solenoid(electrically controlled) which with stand pressure of 7BAR.this is ½” valve which is automatic regulated with a pressure switch attached.
•How it works- If the pressure gets above 4.5kg/cm2 the valve automatically opens and releases the pressure into color tank and the pressure as comes into the it limits as per the pressure is set into pressure of 4kg/cm2.

Mechanical Saffty

•Main door locking system- As the internal pressure increases above 0.5kg the machine gets locked by the means of safety locking valve, and it opens only when the machine is stopped and the pressure decreases up to 0kg/cm2.

Pressure Regulated Saffty

• Safety valve.
• H.T/H.P is a versatile Dyeing Machine for treating material in various forms.
• The range starts form 1KG to 5000KG. Designed for High operating temp.140’ C and pressure 5 Kg.
• The dyeing machine and all wetted parts are made of AISI 316/316L/316 Ti Highly corrosion resistant stainless steel.

Technical Data

• Maximum working temperature: 140’
• Maximum working pressure : 6Kg/cm2